Skip to content

Language

Country

short range antennas

Short Range Antennas

KGEA-HBW-C

KGEA-HBW-C

Short Range Antenna LF(Length until 120 mm) for smart entry system. External housing (integrated ...

KGEA-BFCWX-B

KGEA-BFCWX-B

Keyless Go Emitter Antenna {103x20x9mm ( 33μH – 500μH )} Low Profile Potted Unsealed & Sealed Con...

KGEA-BFCAM-B

KGEA-BFCAM-B

Emitter Antenna {85x16.8x7mm ( 33μH – 500μH)} housing plastic base-potted and outside connector u...

KGEA-HB-B

KGEA-HB-B

LF interior antenna shape h bridge (116,75x20x23mm)

View all
mid range antennas

Mid Range Antennas

KGEA-MRHBC-B

KGEA-MRHBC-B

Middle Range Antenna LF for smart entry system.

KGEA-BFCR-C

KGEA-BFCR-C

Emitter antenna (145x26x12mm / 426uH) housing plastic base with resin and outside connector unsea...

KGEA-MRHPM-B

KGEA-MRHPM-B

Middle Range Antenna LF for smart entry system. (Length until 200mm)

LFAD-MRLC-B

LFAD-MRLC-B

Middle Range Antenna LF for smart entry system. (Length until 120mm)

View all
long range antennas

Long Range Antennas

KGEA-AF-B

KGEA-AF-B

Long Range Flexible Antenna LF for smart entry system. (Length from 300mm until 500mm)

KGEA-AFC-A

KGEA-AFC-A

Long Range Flexible Antenna LF for smart entry system. (Length from 300mm until 500mm)

KGEA-AFULR-B

KGEA-AFULR-B

Ultra Long Range Flexible Antenna LF (length until 500mm) for smart entry system

View all
door handle

Door Handle

PB-S1

PB-S1

Push button switch LF-RH-W

PB-S2

PB-S2

Push button switch LF-RH-W

PB-S3

PB-S3

Push button switch LF-RH-W

View all
Emitter antennas

Emitter antennas

PKE Systems work by having a series of LF (low frequency, 20kHz, 125kHz & 134kHz) transmitter antennas, depending on chip-set used, both inside and outside the vehicle. External antennas are located in the door hadler, mirrors or trunk position. When vehicle is triggered either, close to vehicle, pulling the hadle or touching it an LF signal is transmitted from the antennas to the Key. Key is activated and transmited its ID back to the vehicle using RF channel, if Key code is correct the electronic module unlock the vehicle.

PREMO's emitter antennas (catalog standard values) are available for LF 20, 125 and 134.2kHz operating frequencies with different inductance/ capacitor combinations and appropriate current capability. All members of the KGEA series (type BFCR, BFCWX, BFCAM, etc.) have been developed using special ferrite (low losses) and capacitors dedicated for high pulse applications (COG and low ESR). The antennas meet the AEC-Q200 (specific automotive quality standard) and IP68 standards due to their specific packaging (rugged plastic box filled with polyurethane foam). As standard version these antennas are delivered without connector. If requested by the customer, a connector can be added during production according to the customer's specification (waterproof or non-waterproof).

PREMO is developing customized antennas using different types of technologies over-molding low pressure and high pressure depending on the mechanical requirements and waterproof IP degree required by the customer.

For Door Handle Antennas, we also have the ability to integrate in a unique connector (6ways), the Antenna LF + Switch + LED as a single whole.

PREMO also offers the possibility of integrating the connector into the antenna by fully over-molding by method of high pressure or external housing integrated connector with filled with Polyurethane Plastic.

×

Welcome to consult

We welcome your questions and comments about our products. Please fill out the form below. Your inquiry will be sent to the appropriate specialist who will contact you shortly.