NEWS
05/08/2010
Hall Effect current sensors HCT available in Days
Electronics Industry is currently suffering from raw material shortages and allocations. Some critical components such as Hall Effect sensors and technical plastics like LCP continue to be in allocation thus making the Industry suffer from material shortages and very long lead times even over 30 weeks. Current sensors are critical components and difficult to replace by pin to pin equivalents. Over this struggling period, Premo is supporting it Power Electronics......01/07/2010
PREMO PV products highlighted at the PV Japan 2010
PREMO, high quality inductive components manufacturer, is showing its comprehensive and innovative portfolio of components for photovoltaic applications with Ozeki, PREMO sales representative in Japan, at PV Japan 2010, which takes place from June 30-July 2, 2010. Visit PREMO at Hall C, booth P-C108.
PV Japan 2010 is a new solar power event in Japan dedicated to all fields of photovoltaic technology and all segments of the global solar industry. The exhibition, a......30/06/2010
New PREMO EMC filters for PV applications.
PREMO launches a new EMC filter for PV installations, FEDC series, which allows EMC standards compliancy for entire PV system, prevent pre-mature panel aging and reduce installation volume.
Installed between the PV inverter and the solar panel, DC filters helps to meet EMC directives in grip-connected installations. FEDC Series have been designed to reduce conducted emissions towards the solar panel, to reduce EMI radiations from the solar panel, allowing a longer solar......25/06/2010
High sensitivity telecoils for hearing aid compatible (HAC) with mobile phones. New TP0602 series.
PREMO enlarges its telecoil family with the new TP0602 series, a high reliability and sensitivity coil for application in hearing aids.
The TP0602 series is wound with thin copper wires less than 25 micron (up to 0.012mm diameter) and inductance values between 40 and 170mH. This telecoil achieves a high sensitivity to magnetic field in 1kHz (operation frequency in this kind of devices).The ferrite core material provide a stable performance in a wide range of temperature......24/06/2010
PREMO Current Sensors accurately measure up to 1000 Amps.
Closed-loop Hall Effect sensors offer high performance and excellent linearity.
PREMO enhances its current sensors product range with the newest HCT-1000-SH series, a high current Closed Loop Hall Effect Sensor. New market trends are going to the high current and high frequency devices, making a must to test and measure with excellent accuracy current levels up to 1000 Amps with any type of waveform (DC, AC, pulse, etc.).
By means of close loop......02/06/2010
Premo signs MOU for expanding R&D for sensors in China. A new plant will be open to enlarge production this year.
Premo announces new 4,000 sqm plant with 500 sqm laboratory premises to be operating by Q4 2010 in Wuxi China. The company is growing over 30% and expects to grow at an annualized aggregated rate over 20% the next three years according to existing customers´ contracts and forecasts. This will require further capacity to be available for growth especially for applications in Power Electronics for Renewable energies and Automotive.
The new premises will......25/05/2010
Receiver antennas for synchronized watches and ripple control applications.
PREMO enhances its receiver antennas range with the new RCA-ROD series (radio clock antenna), an antenna for synchronized clocks and ripple control (tariff switching, public lighting control, smart metering, etc.), which consist into a parallel resonant tank.
The ferrite core standard dimension is 10x40mm. Other antenna dimensions are available under request.
The RCA-ROD antenna can be set and tuned in different frequencies from 40kHz to 139kHz, for clock......19/05/2010
New Current sensor for automotive (CSAU)
Premo develops Industry Smallest 35 Amp current sensor for automotive.Max height 8.5mm with less than 2.7 cm2 PCB usage.
Inverters and DC/DC battery chargers for Electric and Hybrid Vehicles require minimum space (Premo’s New Automotive Current Sensor use just 2.4mm3), and maximum power handling per cubic cm (This sensor handles 14.6A/cm3). A proper switching management require digital controls more than conventional PWM and a real time high frequency ( The......14/05/2010
Passive Tags designer kit for industrial and outdoors applications
PREMO launches a new RFID Tags designer kit which integrates different passive tags in HF and UHF band which have been designed to work on metal surfaces and environments where high resistance to dust, rain, etc. is needed, specially for industrial and outdoors applications. Both are IP-68 certified (maximum protection degree for electronics devices).
HF Tags are available with ISO15693 protocol with anticollision and UHF (Global) Tags responds to EPC Class 1, Gen2......13/05/2010
Helical winding high current chokes for efficient inverter applications
PREMO Group has successfully introduced helical winding into our technology portfolio for the design and manufacturing of high-efficiency chokes for solar and wind power electronic inverters. This technology has been traditionally used in other applications, such as welding but has also been proved to be suitable for designing chokes in renewable energies power conversion applications.
By means of reducing choke’s RDC and RAC, as well as increasing the......30/04/2010
Premo Wuxi granted the Hi-Tech Enterprise Certificate in China
Premo Wuxi had been granted the Hi-Tech Enterprise Certificate in China, valid for 3 years, this is the national wide highest recognition for company focus on hi-tech technologies and products, Premo Wuxi was recognized with the main competences on designing, manufacturing and supplying the cutting-edge RFID transponder coils, EMC filters, current sensing components, planar transformers and chokes cover most applications in different market sectors, commented on this......28/04/2010
Premo Wuxi enrolled the membership of Foreign Invest Enterprise Association in Jiangsu Province, China
Premo Wuxi enrolled the membership of Foreign Invest Enterprise Association in Jiangsu Province, China, which is one of the largest foreign investment enterprise networking and lobbying mechanism in China, who support the member on trade, regulatory and broader policy related issues as well as the networking opportunities between members....26/04/2010
Successful participation for PREMO at the SAE 2010 World Congress in Detroit
During the days 13 to 15 April has been held at the Cobo Center in Detroit the SAE 2010 World Congress with emphasis on new technologies involving the electric and hybrid vehicles; focused on eCollaboration, the event included the top 100 world's most innovative companies, including Premo and Nagares, who presented the latest development made together, an on-board power line EMC filter, control and electrical measurement for BEV vehicles (electric vehicles) and PHEVs......21/04/2010
PREMO and LEAR joint development agreement for power electronics applications for hybrid vehicles.
Lear Corporation, leading global supplier of automotive seating systems and electrical power management systems and PREMO, technology leader for inductive, RFID components and EMC filters, announced today the formation of an agreement for the design and development of cutting edge inductive components and technology for automotive power electronics applications for hybrid vehicles.
“We are very pleased to be working with PREMO, a global player across multiple......19/03/2010
Low profile transponder coils for automotive applications. New TOM1203LP series.
PREMO has enlarged its broad range of transponders including its newest TOM1203LP series, a low profile, high performance, and robust transponder coil for automotive applications.
These components are suitable for passive keyless entry (PKE) and tyre pressure monitoring systems (TPMS), and offer a reliable and high performance solution to support hardest requirements for the automotive sector.
The transponder coil has been optimized to achieve high......09/03/2010
PREMO-NAGARES awarded participation in the SAE 2010 Congress
The Spanish companies among the few independent European exhibitors for Electric Vehicles. In the frame of the alliance between PREMO and NAGARES, both companies will attend together to the SAE World Congress in Detroit, Michigan. One single word defines this congress: “Innovation in Automotive”. Companies and experts participate during 3 days in technical sessions, conferences and exhibitor booths where the most innovative automotive......09/03/2010
PREMO highlight at CeBIT its latest innovations for the ICT sector
PREMO has successfully participated at the CeBIT 2010, the largest technology exhibition in the field of innovation on information technology and telecommunications, which took place in Hannover (Germany) on 2-6 March and has received Spain as Guest Country.
The opening ceremony was attended by German Chancellor Angela Merkel and Jose Luis Rodríguez Zapatero, on behalf of Spain.
The event has hosted a total of 4,170 exhibitors......25/02/2010
New PBP Planar Chokes Series for DC/DC Converters. Current levels up to 35Amps in 7.4mm profile
PREMO presents its new PBP19 Series, a new inductors family designed for DC/DC converters and telecom power supplies up to 500W, where the height of the 19" RAC system may be 0.25 U or 0.5 U, increasing power density and reducing telecom power systems sizes. The PBP19 series with 7.4 mm height is offered in Tape&Reel for SMT technology and allows a maximum surface of 92% of total area in contact with the heat dissipating interface, either a coolplate or traditional......24/02/2010
PREMO cooperates with the Hamburg University of Techonology and Trauma Center Hamburg on intelligent implant project
Hamburg University of Technology and PREMO cooperates in a development project on intelligent implants for osteosynthesis managed by the BG Unfallkrankenhaus (Trauma Center) Hamburg.
The main objective of the project is to monitor the healing process of fractures treated by osteosynthesis. For this purpose, the level of load acting on the implants is measured using a strain gauge. This provides the physician with a quantitative measure of the stiffness at the fracture......15/02/2010
Power Product International as exclusive distributor for the UK and Ireland
PREMO Group, the major Spain based manufacturer of Inductive Components, EMC Filters, and Planar Transformers , announces the appointment of Power Products International Ltd as their exclusive Distributor for the UK and Ireland.
Jorge Hermoso, Sales Director for PREMO Group commented “With our product developments for renewable energies and power protection and control we believe Power Products International are our ideal partner; the synergies......12/02/2010
Premo Wuxi has been praised as "Trustful Enterprise on Labor Indemnificatory in 2009" by local labor government.
Premo Wuxi has been praised as "Trustful Enterprise on Labor Indemnificatory in 2009" by local labor government....08/02/2010
Premo and Ihman form a joint agreement for Narrowband and Broadband Radio Modules
IHMAN, an Spanish company whose primary mission is the highly engineered development for business and industry, and PREDAN, (company belongs to PREMO GROUP) technology leader for RFID components, announced today the formation of an agreement to develop a commercial and marketing project to provide to national and global market a Radio Communication module to integrate in applications whose require a reliable radio-link (range till 1km, sight view) in 868MHz and 915MHz bands......20/01/2010
PREMO will show its latest innovations in the WIN 2010 fair in Turkey
PREMO will co-participate with Marke Elektronik, sales representative in Turkey, at the World of Industry (WIN) Fair, Eurasia’s biggest manufacturing industry fair celebrated in Turkey. The event will take place from 25-28 February in Istanbul. Visit us at Hall 2/ booth B250!
The Turkish Market is one of the most open to the commerce of the world and it forms like a platform bridge between Europe and the Middle East and the Maghreb besides......13/01/2010
Developers of automotive electronics applications could benefit from our emitter antenna designer kit. This sample kit integrates different kind of antennas suitable for applications in Passive Keyless Entry Systems, Keyless Go as well as immobilizers.
The kit includes door handler antennas, trunk antennas, SMD emitter antennas, interior antennas and bumper antennas that have been developed with a frequency between 21kHz, 125kH and 134,2kHz and can......